6
Your computer will restart and detect the scanner. Do
not remove the Setup DVD-ROM from the DVD drive
until your personal computer completely starts up again.
■ Installing QuickScan Pro™(Trial)
QuickScan Pro
TM
is image capturing software based on
the ISIS standard. By using this software together with
ISIS, you can scan documents with the scanner. Follow
the procedure below to install the trial version of Quick-
Scan Pro
TM
that comes with this scanner.
1. Insert the Setup DVD-ROM into the DVD drive.
⇒ <SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL], and then click [QuickScan Pro
(Trial)].
3. In the [Welcome to the InstallShield Wizard for
QuickScan 4.7] dialog box, click the [Next] but-
ton.
4. Type in necessary information in the [Customer
Information] dialog box, and then click the
[Next] button.
5. Install the application, following the on-screen
instructions.
Error Recovery Guide is a software that displays trou-
bleshooting information on screen if any scanner error
occurs.
If you did not install together the Error Recovery Guide
with the driver, please proceed with the procedures
given below for installing it.
1. Insert the Setup DVD-ROM into the DVD drive.
⇒ <SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL].
3. Click [Error Recovery Guide] on the next
screen.
4. Select a language to use for the installation in
the <Choose Setup Language> window and
click [OK].
5. Install the application following the instructions
in the window.
6. When the [InstallShield Wizard Complete]
screen displays, click [Finish].
Depending on the operating system you
are using, you may need to do the follow-
ing.
Windows 2000:
If you see the [Digital Signature not
Found] dialog box, click [Yes].
Windows Vista:
If you see the [Found New Hardware] dia-
log box, select [Locate and install driver
software], and then in the [User Account
Control] dialog box, click the [Continue]
button, if it is displayed.
Be sure to log on as a user with "Adminis-
trator" privileges.
"QuickScan Pro
TM
" included in the Setup
DVD-ROM is a trial version that can be
executed 30 times before it is disabled. If
you wish to continue using this product,
please consider purchasing full version.
(When you install the trial version, use the
displayed Serial Number.)