Fujitsu 5015C - fi - Sheetfed Scanner Getting Started

1
Chapter1 PREPARING THE SCANNER
1.1 Checking the Contents of
the Scanner Package
When you unpack the scanner package, make sure that
the package contains all the parts on the list included in
the package.
If any parts are missing or defective, contact your scan-
ner dealer or an authorized FUJITSU scanner service
provider. Handle the scanner and accessories with care.
1.2 Names of Parts
This section describes the names of parts.
1.3 Operator panel
The operator panel is located on the front side of the
scanner. The panel consists of a Function Number Dis-
play, four buttons and a LED.
.
*) About the settings on the launcher, refer to TWAIN
scanner driver help and the "fi-5015C Operator’s
Guide" on the Setup DVD-ROM.
Automatic Document Feeder (ADF)
Side Guide
ADF paper chute
Document cover
Operator panel
Document
stopper
Extension
Flatbed
Shipping lock
USB connector
DC inlet
ADF cable connector
Main power switch
Name Function
Function Number
Display (2)
Indicates the state of the scan-
ner. The meaning of the num-
bers and alphabets indicated are
explained later in this section.
But-
tons
Function (1)
Changes the Function activated
by the Send to button.
Send to (3)
Launches the linked application
software (*).
Scan (4)
Power button
(6)
Turns the scanner ON and OFF.
Power LED(5)
Lights when the scanner is
turned ON.
(1)
(2)
(3)
(4)
(5)
(6)

Fujitsu 5015C - fi - Sheetfed Scanner Specifications

General

Brand	Fujitsu
Model	5015C - fi - Sheetfed Scanner
Category	Scanner
Language	English