7-14. Human sensor for energy saving (For KGTB, KGTE, and
KGTF series wall mounted and Ceiling types)
If no one enters the room for approximately 20 minutes, the set temperature is automatically con-
trolled. (When someone comes back into the room, the human sensor detect this, and automatically
revert to the original settings.)
Operation mode
Operation details
(If there is no one in the room for a while)
Wall mounted Ceiling
Cool/Dry
The setting temperature is increased by maximum 2°C.
(Maximum setting temperature: 30°C)
Heat
The setting temperature is decreased
by maximum 4°C.
(Minimum setting temperature: 16°C)
The setting temperature is decreased
by maximum 2°C.
(Minimum setting temperature: 16°C)
Auto
Energy saving function is performed automatically for the selected mode
(cool/heat/dry).
• Application range:
Vertical angle 90°
Side view
Horizontal angle 100
°
Top view
90°
6 m
50° 50°
6 m
Energy saving function may not work when the room temperature is very different from the tem-
perature defined in the temperature setting, such as when immediately after starting the operation.
• Details about detection with the human sensor:
The human sensor detects whether there are people in the room by looking for movement by peo-
ple in the room.
7-14. Human sensor for energy saving (For KGTB, KGTE, and KGTF series wall
mounted and Ceiling types)
- (04-76) - 7. Various control
CONTROL AND
FUNCTIONS
CONTROL AND
FUNCTIONS
To Next Page
Loading...
Need help?
General
