Operation
Activate/deactivate ECO operating mode
The pow er consumption of the device can be decreased by redu cing
the brightness of the picture.
► Press the
ECO
button to switch the EC O operating mode on or off.
The message ECO Mode ein or ECO Mode off appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Mode
Office
Colour
6500K
Brightness
reduced
After the ECO operating mode is switched off, the b rightness previously set by the user is restored.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
M
ENU
button for a few seconds while you switch on
the monito r with the ON/OFF switch.
The message OSD lo
cked / unlocked is displayed.
Please proceed
in the s ame ma nner to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch c an be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press and hold the
ECO
and
INPUT
buttons at the same time for a few seconds.
The message Power button locked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch aga in.
Fujitsu Technology Solutions 23
Downloaded from ManualMonitor.com Manuals