57
- Power Management
Enable or Disable the Hibernation Feature
The Hibernate is enabled by default. To disable or enable the Hibernation feature follow these steps:
1 From the Start menu, select Control Panel, then select the Power Options icon.
2 Select “Choose what the power button does” or “Choose what closing the lid does”, then make your selections
(Do Nothing, Sleep, Hibernate, or Shut Down).
Windows Power Management
The Power Options icon located in the Control Panel allows you to configure some power management
settings. For example, you can use the Power Options to set the timeout values for turning off the display
and hard disks whether you are running the notebook on battery power or one of the adapters.
Restarting the System
1 Click the Start button, and then move the mouse over the right arrow.
2 Select the desired action from the list.
Powering Off
Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off
the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down
without error, use the Windows shut down procedure.
TURNING OFF YOUR LIFEBOOK NOTEBOOK WITHOUT EXITING WINDOWS OR TURNING ON YOUR
NOTEBOOK WITHIN 10 SECONDS OF THE NOTEBOOK BEING SHUT OFF MAY CAUSE AN ERROR WHEN
YOU START THE NEXT TIME.
B
E SURE TO CLOSE ALL FILES, EXIT ALL APPLICATIONS, AND SHUT DOWN YOUR OPERATING SYSTEM
PRIOR TO TURNING OFF THE POWER. IF FILES ARE OPEN WHEN YOU TURN THE POWER OFF, YOU WILL
LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED, AND MAY CAUSE DISK ERRORS.
To Next Page
Loading...
Need help?
General