84
- Device Ports
External Video Port
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator.
In order to connect your notebook to this device, follow the instructions that are included in “Port Repli-
cator” on page 85.
The external video port allows you to connect an
external monitor or LCD projector. In order to
connect an external video device, follow these easy
steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
3 Tighten the two hold-down screws, located on each
end of the connector.
Figure 30. Connecting External Video Device
To Next Page
Loading...
Need help?
General