54
- Secure Digital Cards
Installing SD Cards
SD Cards are installed in the SD Card slot. To install a card, follow these steps:
1 See your specific card manual for instructions on the installation of your card. Some cards may require that your
notebook is off while installing them.
2 Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
3 Insert your card into the slot with the product label facing up.
4 Push the card firmly into the slot until it is seated in the connector.
Removing an SD Card
To remove an SD Card, follow these easy steps:
Push the card in until it unlatches. It will then eject from the slot for removal.
INSTALLING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK NOTEBOOK’S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR
YOUR LIFEBOOK NOTEBOOK.
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD,
YOUR LIFEBOOK NOTEBOOK, OR BOTH.
S
EE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME CARDS MAY REQUIRE YOUR LIFEBOOK NOTEBOOK TO
BE IN SLEEP MODE OR OFF WHILE REMOVING THEM.
To Next Page
Loading...
Need help?
General