Fujitsu Mobile Color Scanner User Manual

40
If FUJITSU Mobile Color Scanner has not been created and USB Device is displayed
under Other Devices or USB Device under Imaging Devices is marked with an exclamation
mark (!) on Windows 98/Me/2000, the scanner driver has not been installed successfully.
Reinstall the scanner driver by following the procedure below:
• When you have not installed the scanner driver
On Windows 98/Me, select USB Device under Other Devices by clicking the left mouse
button and click the Remove button to uninstall it. (See “Uninstalling Software”.)
On Windows 2000, click the right mouse button on FUJITSU Mobile Color Scanner in
the Device Manager dialog box. A menu appears. Click Remove to uninstall FUJITSU
Mobile Color Scanner. (See “Uninstalling Software”.)
After completion of uninstallation, disconnect the scanner if connected, install the scanner
driver, and then connect the scanner to the computer. (See “Preparations”.)
• When you have installed the scanner driver
Uninstall the device (USB Device) following the procedure described in “When you
have not installed the scanner driver” above. Then, disconnect the scanner if connected
and connect the scanner to the computer again.
For details on how to uninstall a device, see “Uninstalling Software”.
05_Scanner (34-49) 8/15/01, 8:40 AM40

Fujitsu Mobile Color Scanner Specifications

General

Brand	Fujitsu
Model	Mobile Color Scanner
Category	Scanner
Language	English