Operation
Function Description
Daisy Chain
Daisy chain via display port and/or enable/disable U SB-C.
Important Notice: When enabling / disab ling this function, the power su pply
via USB-C is interrupted briefly!
This function facilitates exp ansion of the desktop to a m onitor connected via
"DP OUT". With USB-C this reduces the speed of data transmission from
USB 3.1 Gen1 (up to 5 Gbit/s) to USB 2.0 (u p to 480 Mbit/s).
This option only appears if your model supports daisy chaining and
Displayport or USB-C is selected as the input signal.
FreeSync
Activating/deactivati
ng AMD FreeSync
The AMD-FreeSync techn
ology is an AMD project that relies on indust ry
standards such as Displ
ayport Adaptive-Sync in order to provide end users
with a dynamic frame fre
quency. With the AMD-F reeSync technology,
the frame frequency o f
a display is synchronized with the frame rate of
FreeSync-compatibl
e graphics cards. This reduces or eliminates visual
objects that many us
ers find particularly annoying, i.e.: input latency, image
distortion and jerk
ing during gaming and video sessions.
The AMD-FreeSync t
echnology may be used via Disp layport and HDMI
connections.
Overdrive
Enable/disable enhanced reaction time
This function can be used to improve the focus in fast moving images.
This setting can only be configured in Video or Custom application mode.
DDC-CI
Enable/disable Display Data Ch annel - Command Interface
This function allows data to be exchanged via the connection betwe en the
PC and the display.
Status LED
Enable/disa
ble Status LED
With this fu
nction, you can sw itc h the status LED on the m onitor on and off.
Power Butt
on
Setting the func tion of the On/Off switch
With this setting, yo u can decide whether to use the On/Off switch on the
monitor to s witch the display or the connected computer on and off.
This option only appears if USB-C was selected as an input signal.
Factory recall
Activate the factory settings
With this function all setting s are reset to the factory settings.
► Press
the
button to run the function.
► Press the
buttontoconfirm or the button to cancel.
The language selection menu appears.
With a V G A data cable, the message Auto Processing is displayed.
Fujitsu 29