Operation
Function Description
Input
Select the input source for Picture in Picture
Mode
Adjust the picture size
With this function, you can se lect a small or large picture s ize for P icture in
Picture.
To optimize the display quality, in the settings Large and Small a resolution
with a 16:9 aspect ratio is recommended.
The settings Horizontal and Ver t i c a l allow you to split the image in half
(Picture-by-P ic ture).
Position
Adjust the picture position
With this function, you can move the Picture in Picture to the bottom right,
bottom left, top right or top left.
USB Upstream
Changing the USB assi
gnment
With this function y
ou can switch the assignment of the USB devices
connected to the m o
nitor between the systems shown.
Primary =TheUSBde
vices are assigned to the primary screen.
Secondary =TheUS
B devices are assigned to the secondary screen.
Swap Inputs
Change input source
With this function, you can replace the main input source with the Picture in
Picture input source and vice versa.
Configuring the OSD menu
OSD
Language
Timeout
Rotation
50
English
Off
MENU
Image
Picture in Picture
OSD
Advanced
Information
26 Fujitsu