RX2530 M1
Operating Manual 31
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, carefully read the safety instructions in "Important information" on
page 33.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 48).
Ê Make sure that you have all necessary manuals (see "Documentation
overview" on page 13); print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Mount the server into the rack (see "Installing/removing the server in/from
the rack" on page 49).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 51 and "Notes on connecting/disconnecting cables" on
page 56.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 54).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Control elements and indicators" on page 59).
To Next Page
Loading...
Need help?
General