RX2530 M4
Operating Manual 31
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter "Important information" on page 33.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 46).
Ê Make sure that all necessary manuals (see "Documentation overview" on
page 10) are available; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. Install these in the server as described in the supplied
documentation.
Ê Install the server in the rack (see section "Installing/removing the server
in/from the rack" on page 47).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 49 and "Notes on connecting/disconnecting cables" on
page 55.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 52).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Controls and indicators" on page 57).