Tro ubl eshooting and tips
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, install the driver
for the standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the drive r for the "Dual D igitizer"
model.
Stylus is in sleep mode.
► Press th e upper stylus button to w ake the
stylus from sleep mode.
Stylus battery is completely discharged. ► Change the stylus battery as described in
chapters "
Removing t he styl us bat tery",
Page 34 and "Installing the stylus battery",
Page 34.
The Tablet PC does not start after switch on
TabletPC
Cause Troubleshooting
The battery is dead.
► Charge the battery.
or
► Connect the AC ad apter to the Tablet
PC.
The AC adapter is not connected properly. ► Check whether the AC adapter is properly
connected to the Tablet PC.
► Switch th e Tablet PC on.
The Tablet PC stops working
TabletPCEnding
Cause Troubleshooting
The Tablet PC is in energy saving mode.
► End energy saving mode.
An application program has cau sed the
malfunction.
► Close the application program or restart
the Ta blet PC (by restarting the operating
system or sw itching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Connect the AC ad apter to the Tablet
PC.
Fujitsu 75
To Next Page
Loading...
Need help?
General