Furuno DUAL GPS GP-150-DUAL User Manual

6. SETTING UP VARIOUS DISPLAYS
6-4
6.3 Demo Display
The demo display provides simulated
operation of this unit. Own ship tracks, at the
speed selected, a figure eight course, starting
from position entered. All controls are
operative; you may change course, enter
marks, etc.
1) While pressing and holding down NU/CU
ENT, turn on the power.
_ _°
Demo Setting
ENT: Enter
: Column
: Cursor
_ _._ _ _’ N _ _ _°_ _._ _ _’ W
Base Position
Speed
00.00kn
: N/S, E/W
Figure 6-6 DEMO SETTING menu
2) Key in latitude of initial position.
3) If necessary, press
to switch from
north latitude to south latitude or vice
versa.
4) Key in longitude.
5) If necessary, press
to switch from
east longitude to west longitude or vice
versa.
6) Press
.
7) Key in speed.
8) Press the NU/CU ENT key to start the
demonstration mode. The plotter display
appears and the demo mode begins. After
the test results appear, the demo setting
mode menu appears.
9) To quit the demo display, turn off the
power.
All tracks, marks and data entered during the
simulation are erased and default demo
mode settings are restored.
Note: The return to the normal mode, turn off
the power and then turn it on while
pressing and hold down NU/CU ENT
key.

Furuno DUAL GPS GP-150-DUAL Specifications

General

Brand	Furuno
Model	DUAL GPS GP-150-DUAL
Category	GPS
Language	English