Furuno FAR-28 Series User Manual

5. VIDEO PLOTTER OPERATION
5-15
5.9.3 Auto target track (A, B, C and W types)
You may display the track for up to 15 targets, automatically or manually.
1. Left-click the MENU box to open the menu.
2. Select 5 [PLOTTER] to open the PLOTTER menu.
3. Select 0 AUTO TARGET TRACK.
4. Select OFF or ON as appropriate.
ON: TT target number (1-15) automatically assigned to corresponding ship's
track on the plotter display.
OFF: The operator manually assigns target numbers to TT and AIS targets.
5. Push the right button twice to close the menu. If you selected OFF at step 4,
go to step 6 to assign a number to a track.
6. Put the cursor inside the effective display then spin the scrollwheel to show
TARGET TRACK ON/EXIT in the guidance area.
7. Select the track of the TT or AIS target for which to assign target number
then push the left button.
8. Repeat step 7 to assign target numbers to other tracked targets, up to 15
targets.
9. Push the right button to finish.
5.9.4 Choosing track color (A, B, C and W types)
1. Left-click the MENU box to open the menu.
2. Select 5 [PLOTTER] to open the PLOTTER menu.
3. Select 4 OWN TRACK COLOR or 6 TGT TRACK COLOR, whichever track
color you want to set.
4. Select color desired.
5. Push the right button twice to close the menu.

Furuno FAR-28 Series Specifications

General

Brand	Furuno
Model	FAR-28 Series
Category	Marine Radar
Language	English