7-5
To select waypoint switching method do the
following:
1. Press the [MENU] key.
2. Press the soft key DISPLAY OPTIONS.
3. Select WAYPOINTS SW.
4. Press the soft key EDIT to show the
waypoint sw window.
5. Select appropriate waypoint switching
method.
6. Press the soft key ENTER to close the
window.
7.5 Cancelling Navigation
1. Press the [WPT/RTE] key.
2. Press the soft key LOG.
3. Press the soft key STOP.
4. Press the [ENTER] key to go stand by.
5. Press the soft key RELEASE.
6. Press the [ENTER] key.
To Next Page
Loading...
Need help?
General
