11-7
11.7 Displaying Program
Number
1. Press the [MENU] key to open the main
menu.
2. Press the soft key CONFIGURATION to
show the configuration menu.
3. Press the soft key SYSTEM MENU to
open the system menu.
4. Press the soft key SELF TEST to open
the test menu.
5. Press the soft key MEMORY, I/O TEST to
start the test. Test results and program
numbers. are shown as below.
PROGRAM: OK
No.14518150**
RETURN
TEST
SRAM: OK
DRAM: OK
PORT1: -- --
PORT2: -- --
INTERNAL
BATTERY: OK
GPS
RECEIVER: OK
No.48502170**
BEACON
RECEIVER: OK
No.08501820**
No.
Program Number
Figure 11-21 Memory, I/O test results
To Next Page
Loading...
Need help?
General
