Fusion MS-IP700 User Manual

57
Sources
UsethisoptiontoturntheAMorVHFtunersourceonoroff,ifrequired.This
is usefulifyouonlylistentoFManddonotwishtostepthroughAMandVHF
when selecting a tuner source.
To enable or disable the AM of VHF tuner sources:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselecttheSettings > Sources.
3. Ifrequired,presstheEncodertoenabletheAMsource()ordisable
 theAMsource().
4. Ifrequired,turntheEncodertoselectVHF then,presstheEncoderto
 enabletheVHFsource()ordisabletheVHFsource().
5. Press any key to exit.
Factory Reset
The factory reset function will return all settings in the 700 Series to the
factory default value.
Warning: AllAM,FMandVHFstationpresentsareerased.TunerandVHF
tuner regions are reset to USA. All zones are enabled and zone settings, tone,
subwoofer filter settings, source settings and device name are returned to
default values.
To reset your 700 Series to factory default values:
1.PresstheMenuKey.
2.TurnandpresstheEncodertoselectSettings > Update.
3.TurnandpresstheEncodertoselectFactory reset. All settings will be
restored to the factory default. At the completion of the reset process the
stereo will automatically power down and restart.

Fusion MS-IP700 Specifications

General

Brand	Fusion
Model	MS-IP700
Category	Entertainment System
Language	English