Fusion MS-IP700i - Getting Started; Powering the Unit On or Off

11
12
ADJUSTING SUB-WOOFER LEVEL AND TONE
Use the Sub level and Tone screens to set the sub-woofer levels and tone. Sub-woofer
level can be adjusted for each Zone individually, but tone
adjustments affect all Zones.
DISPLAYING THE CLOCK
Use the Clock key to display the current time. If the time is incorrect, see “Clock
Setting”onpage48.
Note: The current time is also displayed in the title bar of each input
source screen.
Clock
• PresstheClockkeytodisplaythecurrenttime
Menu key Encoder
To set sub-woofer levels or tone:
1. PressandholddowntheEncoderforatleastonesecond.TheSublevelscreenis
displayed.
2. TurntheEncodertoadjustthesub-wooferlevelforthehighlightedZone,as
required.
3. PresstheEncodertohighlightthenextZone,andadjustasrequired.Whenyou
presstheEncoderinthelastZone,theTonescreenisdisplayed.
4. TurntheEncodertoleftorrighttoadjusttheBasslevel,ifrequired.
5. PresstheEncodertohighlighteachtonecontrol,andadjustasrequired.When
youpresstheEncoderontheTrebletonecontrol,theSublevelscreenis
displayed again.
6. Press any key to exit