20 Fishfinder 160C Owner’s Manual
OPERATING INSTRUCTIONS > THE SETUP MENU
Reset Distance
Reset Distance appears only if you are using
a speed-capable transducer. Reset Distance
resets the displayed Distance to zero.
Units
Depth
Choose to show measurements in Feet (ft, default),
Meters (m) or Fathoms (fa).
Temperature
Choose to show the water temperature in
Fahrenheit (°F, default) or Celsius (°C).
Speed
Choose to show Speed in Miles per
Hour (mph, default), Kilometers per
Hour (kph), or Knots (kt).
Distance
Choose to show Distance in Miles (mi,
default), Nautical Miles (nm), or Kilometers
(km).
System
Simulator
The Fishfinder 160C comes with a built-in Simulator mode that
allows you to practice and learn the operation of the unit at home
rather than on the water. The unit indicates that it is running the
Simulator mode by showing in the lower-left of the
screen. While in the simulator mode, the unit displays a simulated
bottom scene, and the Fishfinder 160C can be controlled (except
Gain) just as if it were on the water. To exit Simulator mode, turn the
unit off. If no keys are pressed for 1 minute, the unit automatically
resets while in Simulator mode. At startup if a transducer is not
detected, the unit automatically starts in Simulator mode.
Language
Choose to display information in one of four languages.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
