Powerboat Autopilot Operation
6 GHC 10 Owner’s Manual
The circles pattern steers the boat in a continuous circle, in a specied
direction, and at a specied time interval.
You can adjust the time the autopilot takes to complete the circle. The
default value creates a circle that takes 5 minutes to complete.
1. From the heading screen, select > > >
.
2. Select or to set the time.
3. Select .
1. From the heading screen, select > > .
2. Select .
3. Select an option:
• Select to begin a clockwise turn.
• Select to begin a counter-clockwise turn.
The autopilot follows the circles pattern, and the heading screen shows
the time of the circles pattern
➀
.
➀
The autopilot positions the boat so that the circle pattern is centered on
the location at which you engage the pattern.
To quickly resume a pattern after you make a heading adjustment with
the helm or the soft keys (page 3), select the center soft key twice.
To Next Page
Loading...
Need help?
General
