Powerboat Autopilot Operation
GHC 10 Owner’s Manual 9
The autopilot steers the boat according to a route dened on your
chartplotter. Your GHC 10 must be connected to a NMEA 2000 or NMEA
0183 compatible chartplotter to use route to.
Before you can begin using route to, you must dene a route on your
chartplotter. Refer to the owner’s manual included with your chartplotter for
information on how to dene a route.
From the heading screen, select > > .
The autopilot steers your boat according to the route dened on your
chartplotter, and the heading screen shows the distance to the next turn
➀
and distance off course
➋
.
➊
➋
The orbit pattern steers the boat in a continuous circle around the active
waypoint (page 8). The size of the circle is dened by your distance from the
active waypoint when you begin the orbit pattern. There are no settings to
adjust.
1. From the heading screen, select > > >
.
2. Select an option:
• Select to begin a clockwise turn.
• Select to begin a counter-clockwise turn.
The autopilot steers your boat in a continuous circle around the active
waypoint, and the heading screen shows the direction of orbit
➊
.
➊
To Next Page
Loading...
Need help?
General
