Reference
33
System Setup
Restoring Factory Settings
To restore the factory settings:
1. Use the ROCKER keypad to move the cursor to the file tab for which you want to restore the
factory settings.
2. Press the OPTION key. A window is displayed with Restore Factory Settings highlighted
(top right picture).
3. Press the ENTER key. Only the settings for that file tab are modified.
4. If desired, repeat steps 1 through 3 for other file tabs.
The file tab headings and System Setup functions are:
General - Simulator, Night Mode, Battery Type, Beeper, and Distance Units.
Alarms - Approaching Waypoint Alarm, Speed Alarm.
Time - Formats for 12 or 24-hour Time, Time Zone, Display of Current Time and Date, Sunrise and
Sunset Times.
Comm Port - Serial Data Communication Format.
The following pages describe, in more detail, the available setting for each System Setup file tab item.
To Next Page
Loading...
Need help?
General
