gefran 600 User Manual

(*) The automatic return PV/SV display is disabled for these displays
6 • PROGRAMMING and CONFIGURATION
al.1
al.2
a.xb
0V.P
sp
SP.1
SP.2
in.2
If Inc, Dec, F keys are not pressed within 15 sec, display returns
automatically to P.V. value.
P.V. / S.V.
P.V. / S.V.
Process variable (PV display)
Work Setpoint (SV display) or control
output value with controller in manual
Alarm point 2 (scale points)
Alarm point 3 (scale points)
Heater break alarm point
scale points of ammeter input)
Control output value
(+Heat / -Cool)
Local Setpoint
LEVEL 1 MENU
Setpoint 1
Setpoint 2
Ammeter input value
(with CT input present)
Alarm point 1 (scale points)
N.B.: Once a particular configuration is entered, all unnecessary parameters are no longer displayed
-
al.3
upd
(od
(.xd
err
• InFo Display
INF
Software
version
Instrument code
Self diagnostic
error code
Configuration
hrd
+8 error OUT2 card recognition
+16 error OUT3 card recognition
Information
display
(*)
(*)
0 No Error
1 Lo
2 Hi
3 ERR
4 SBR
OUTPUT 2
0 = None
1 = Relay
2 = Logic/Digital insulated
3 = Triac
INPUT /OUTPUT 3
0 = None
1 = Relay
2 = Logic/Digital insulated
3 = Continuous
4 = Analog
5 = In TA
6 = In digital
SERIAL COMMUNICATION / OUT4
0 = None
1 = RS 485
2 = Relay
Example: 1 1 1 = R + R + RS 485
INF
Serial communication
SEr
InP
Out
PAS = 99
Pro
Lin
Input settings
Output settings
Hardware configuration
Input linearization
NO
Keep the F key
pressed to scroll
the menus
Release the F
key to select the
displayed menu
Press the F key
to access the
parameters
Keep the F key
pressed to exit any
menu
Keep F + Auto/Man
keys pressed for 2
sec. on any menu
to go immediately
to level 1 display
Pressing the Auto/
Man + F keys
on any menu
immediately returns
you to the previous
parameter.
PAS
S4 Jumper
(CPU) = ON
NO
Hrd
U.CA
Custom menu
Password
User calibration
Protection code
Information display
CFG
4 80336L_MHW_600_07-2011_ENG
4 / 31

gefran 600 Specifications

General

Brand	gefran
Model	600
Category	Controller
Language	English