Gerber Technology AccuPlot AP-300 User Manual

Offline Operation
Reversing the Take-up Roll 4-5
Reversing the Take-up RollReversing the Take-up Roll
The Reverse function turns the take-up roll clockwise, making it easy to cut off
a plot.
TO REVERSE THE TAKE-UP ROLL AND CUT OFF A PLOT
1. Raise the three paper grippers.
2. Press F3-PAPER ADV from the Offline menu to display the Paper Advance
menu.
3. Press F3-REVERSE. The paper automatically reverses. The message
“Reversing Paper” displays briefly, then the Paper Advance screen
reappears.
4. Using a utility knife, cut the plot off at the point where it finishes
unwinding from the take-up roll.
5. Trim the other side of the plot with the utility knife and tape the free end
of the paper back onto the take-up roll.
6. Put the grippers back into position.
PAPER ADVANCE
PAGE REVERSE
MANUAL EXIT

Gerber Technology AccuPlot AP-300 Specifications

General

Brand	Gerber Technology
Model	AccuPlot AP-300
Category	Plotter
Language	English