Introduction Servo-i Ventilator System
2 - 4 Service Manual Revision 02
2
SVX9011
User Interface
The User Interface can be mounted onto the Mobile
cart but can also easily be removed from the cart
and mounted on the bed post or table/shelf.
The User Interface can be rotated and tilted into a
suitable position. Locking levers, mounting devices
and some other items are shown in the illustration
above.
1. Display with touch screen.
2. Fixed keys for immediate access to special
windows.
3. Main rotary dial.
4. Special function keys.
5. Direct access knobs.
6. Mains indicator (green).
7. Standby indicator (yellow).
8. Start/Stop (Standby) ventilation key.
9. Luminescence detector, adjusts display
brightness automatically.
10. Loudspeaker grid.
11. Cable reel.
12. PC card slot with slot cover.
13. Control cable between User Interface and
Patient Unit.
14. Service connector, for PC.
15. On/Off switch.
16. Panel holder
17. Locking screw, alternative mounting
18. Locking arm, rotation
19. Locking arm, tilting.
20. Serial number label. The serial number stated on
this label is the ID number of the User Interface.
This serial number must always be refered to
when ordering service, spare parts, etc for the
User Interface.
For further information regarding operation of the
User Interface, refer to the User's manual.
To Next Page
Loading...
Need help?
General
