Getinge Maquet SERVO-i Service Manual

6
Revision 02 Service Manual 6 - 1
Servo-i Ventilator System Troubleshooting
6. Troubleshooting
General .............................................................. 6 - 2
Pre-use check ................................................... 6 - 3
Technical error codes ........................................ 6 - 11
Only personnel trained and authorized
by Maquet shall be permitted to perform
installation, service or maintenance of
the Servo-i.
Make sure to prepare the Servo-i properly before
disassembling and assembling. Refer to section
'Hazard notices' in chapter 'Important'.
Any service or maintenance must be noted in a
log book.
Discard disposable, replaced and left-over parts
in accordance with appropriate industrial and
environmental standards.
After any installation, maintenance or service
intervention in the Servo-i, perform a 'Pre-use
check'. Refer to the 'Servo-i Ventilator System –
User's Manual' for details.

Getinge Maquet SERVO-i Specifications

General

Brand	Getinge
Model	Maquet SERVO-i
Category	Medical Equipment
Language	English