BIOS Setup
37
Onboard Serial Port A
Auto BIOS will automatically setup the port A address.
3F8/IRQ4 Enable onboard Serial port A and address is 3F8. (Default Value)
2F8/IRQ3 Enable onboard Serial port A and address is 2F8.
3E8/IRQ4 Enable onboard Serial port A and address is 3E8.
2E8/IRQ3 Enable onboard Serial port A and address is 2E8.
Disabled Disable onboard Serial port A.
Onboard Serial Port B
Auto BIOS will automatically setup the port B address.
3F8/IRQ4 Enable onboard Serial port B and address is 3F8.
2F8/IRQ3 Enable onboard Serial port B and address is 2F8. (Default Value)
3E8/IRQ4 Enable onboard Serial port B and address is 3E8.
2E8/IRQ3 Enable onboard Serial port B and address is 2E8.
Disabled Disable onboard Serial port B.
Serial Port B Mode
Normal Set Serial Port B Mode to Normal. (Default Value)
HPSIR Set Serial Port B Mode to HPSIR.
ASKIR Set Serial Port B Mode to ASKIR.
Duplex Mode (When you set Serial Port B to HPSIR or ASKIR Mode)
Full Set IR to Full mode.
Half Set IR to Half mode.(Default Value)
Onboard Parallel port
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Disabled Disable onboard LPT port.