Gigabyte GA-B85M-HD3 User Manual (English)

To Next Page

To Previous Page

- 25 -

2-4 BIOS Features

& Boot Option Priorities

Species the overall boot order from the available devices. For example, you can set hard drive as the

rst priority (Boot Option #1) and DVD ROM drive as the second priority (Boot Option #2). The list only

displays the device with the highest priority for a specic type. For example, only hard drive dened as the

rst priority on the Hard Drive BBS Priorities submenu will be presented here.

Removable storage devices that support GPT format will be prexed with "UEFI:" string on the boot device

list. To boot from an operating system that supports GPT partitioning, select the device prexed with "UEFI:"

string.

Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select

the optical drive that contains the Windows 7 64-bit installation disk and is prexed with "UEFI:" string.

& Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities

Species the boot order for a specic device type, such as hard drives, optical drives, oppy disk drives,

and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that

presents the devices of the same type that are connected. This item is present only if at least one device

for this type is installed.

& Bootup NumLock State

Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:

Enabled)

& Security Option

Species whether a password is required every time the system boots, or only when you enter BIOS Setup.

After conguring this item, set the password(s) under the Administrator Password/User Password item.

Setup A password is only required for entering the BIOS Setup program.

System A password is required for booting the system and for entering the BIOS Setup

program. (Default)

& Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the

GIGABYTE Logo when the system starts up. (Default: Enabled)

& Fast Boot

Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup

speed. (Default: Disabled)

Need help?

Do you have a question about the Gigabyte GA-B85M-HD3 and is the answer not in the manual?

Gigabyte GA-B85M-HD3 Specifications

General

Non-ECC	Yes
Memory voltage	1.5 V
Memory channels	Dual-channel
Memory slots type	DIMM
Number of memory slots	2
Supported memory types	DDR3-SDRAM
Maximum internal memory	16 GB
Supported memory clock speeds	1333, 1600 MHz
Processor socket	LGA 1150 (Socket H3)
Processor manufacturer	Intel
Compatible processor series	Intel Celeron, Intel Pentium
Maximum number of SMP processors	1
Power fan connector	No
Number of SATA connectors	6
Number of SATA III connectors	4
HDMI version	1.4a
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio chip	Realtek ALC887
Component for	PC
Power source type	ATX
Motherboard chipset	Intel® B85
Audio output channels	7.1 channels
Motherboard form factor	mini ATX
Supported storage drive interfaces	SATA, SATA II, SATA III
Graphics card	HD Graphics
Maximum resolution	4096 x 2160 pixels
Parallel processing technology support	Not supported
Bundled software	Intel Rapid Start Technology\\r Intel Smart Connect Technology\\r Intel Small Business Advantage\\r Norton Internet Security
BIOS type	UEFI AMI
ACPI version	2.0a