Gigabyte MS03-CE0 User Manual

- 66 -
BIOS Setup
2-3-7 PCH Conguration
Parameter
Description
PCH-IOConguration
SATAAndRSTConguration/
SATA Controller And RST
Conguration
Press[Enter]tocongureadvanceditems.

SATAConguration
– Enable/Disable SATA controller.
– Options available: Enabled, Disabled. Default setting is Enabled.

SATA Mode Selection
– ConguresonchipSATAtype.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI, RAID. Default setting is AHCI.

RAID Device ID
(Note)
– Choose RAID Device ID.
– Options available: Client, Alternate, Server. Default setting is Server
.

SATA Port 0/1/2/3/4/5/6/7
– ThecategoryidentiesSATAharddrivesthatareinstalledinthe
computer. System will automatically detect HDD type.
(Note) Only appears when HDD sets to RAID Mode.

Gigabyte MS03-CE0 Specifications

General

Brand	Gigabyte
Model	MS03-CE0
Category	Motherboard
Language	English