- 72 -
BIOS Setup
2-3-11 Power Policy
Parameter
Description
Power Policy Quick Settings
Selects a Power Policy Quick Setting.
Optionsavailable:Standard,BestPerformance,EnergyEfcient.Default
setting is Standard.
SpeedStep (Pstates)
Conventional Intel SpeedStep Technology switches both voltage and
frequency in tandem between high and low levels in response to processor
load.
Options available: Enable, Disable. Default setting is Enable.
Turbo Mode
When this item is enabled, the processor will automatically ramp up the
clock speed of 1-2 of its processing cores to improve its performance.
When this item is disabled, the processor will not overclock any of its core.
Options available: Enable, Disable. Default setting is Enable.
CPU C6 report
Enable/Disable the BIOS to enable the report from the CPU C6 state (ACPI
C3) to the OS.
Options available: Disable, Enable, Auto. Default setting is Auto.
Enhanced Halt State (C1E)
Enable/Disable the C1E support for lower power consumption. Takes effect
after reboot.
Options available: Enable, Disable. Default setting is Enable.
Package C State
CongurestheC-Statepackagelimit.
Options available: C0/C1 state, C2 state, C6(non Retention) state,
C6(Retention) state, No Limit, Auto. Default setting is Auto.
To Next Page
Loading...
Need help?
General
