Executing Programs 25
Code 429159
Rev. 15/0717
4.12. TILT system operation
Operation using the
control panel
Operation using the
remote control
Open the door of the washing machine and secure it with the hook on the right-hand side. If the main
menu window is displayed, press the OK key to go to the PROGRAM EXECUTION MODE.
Run the desired option by pressing the corresponding key on the multifunction keyboard or by activating
the selector on the remote control:
Loading position. The system tilts the washer backwards. When the final tilt
position is reached, the auxiliary loading and unloading functions can be
accessed.
Activate the function corresponding to the figure in order to tilt the washer into the
loading position.
Unloading position. The system tilts the washer forwards. When the final tilt
position is reached, the auxiliary loading and unloading functions can be
accessed.
Activate the function corresponding to the figure in order to tilt the washer into the
unloading position.
Loading and unloading functions
Cold water input. Only in loading position.
Activate the function corresponding to the figure. If the function is not deactivated,
the valve closes automatically when it reaches a preset level.
Water inlet A2 (hot and cold water depending on the washer connections). Only in
loading position. Activate the function corresponding to the figure. If the function is
not deactivated, the valve closes automatically when it reaches a preset level.
Clockwise rotation.
Press the DRUM ROTATION button.
Activate the function corresponding to the figure.
The drum will turn clockwise at low speed.
To select anti-clockwise turning, release and re-press the DRUM ROTATION
button.
Anticlockwise rotation.
Press the DRUM ROTATION button.
Activate the function corresponding to the figure.
The drum will turn anticlockwise at low speed.
To select clockwise turning, release and re-press the DRUM ROTATION button.
To Next Page
Loading...
Need help?
General
