System tools 65
Code 429159
Rev. 15/0717
SPIN SPEEDS
Modifying the value of the spin speeds within the established limits is possible, always respecting the
ordering criteria from lowest to highest.
The value of each spin speed is expressed in rpm and it should always be higher than the lowest spin value
and smaller than the highest spin value.
Values programmable by the numerical keyboard
Programming limits and table of factory settings depending on the machine model.
spin speed by default, in rpm
spin speed by default, in rpm
10.3. Setting the clock
The washing machine clock will allow the delayed start of programs (see section 4.7).
This menu permits setting the clock.
Access the set clock menu. The following parameters appear:
Minute ......................... nn
Hour ............................ nn
Day week .............. --------
Day month .................. nn
Month .......................... nn
Year ........................... .nn
Modify the value of each parameter using the ·MOD· key on the multi-function
keyboard. The numerical values can also be modified by using the numerical
keyboard.
Access to the next parameter or going to the previous menu confirms the
selection.
The numerical values must be formed with two digits. Example:
third day of the month ........ 03
month of November ........... 11
year 2005: .......................... 05
To Next Page
Loading...
Need help?
General
