GIRBAU EH090 User Manual

System tools 64
Code 429159
Rev. 15/0717
ROTATION (Start and stop sequences)
Modifying the start and stop times of the five pre-established rotations is possible.
Programmable range:
ON: minimum: 1 second; maximum 25 seconds
OFF: minimum: 1 second; maximum: 55 seconds
Minimum start and stop time: 15 seconds
Values programmable by the numerical keyboard.
To maintain the order criteria from lowest to highest, the ON time of each rotation can’t never be less than
the start time of the lower rotation and will always be equal to or higher than the start time of the higher
rotation.
Programming limits and table of factory settings
WR
values by default (sec)
programmable ON range
ON
OFF
min.
max.
WR1
5
55
WR1  2seg.
WR1  WR2
WR2
5
10
WR2  WR1
WR2  WR3
WR3
5
25
WR3  WR2
WR3  WR4
WR4
15
15
WR4  WR3
WR4  WR5
WR5
25
5
WR5  WR4
WR5  25seg
WASH ROTATION SPEEDS
Modifying the value of the four drum rotation speeds in the wash cycle within the established limits is possible,
always respecting the ordering criteria from lowest to highest.
The value of each speed is expressed in rpm and it should always be higher than the lowest spin value and
smaller than the highest spin value.
Values programmable by the numerical keyboard.
Programming limits and table of factory settings depending on the machine model.
WS
washing speed by default, in rpm
programmable
ranges
HS-6013
HS-6017
EH030
EH040
HS-6023
EH055
HS-6024
EH060
HS-6032
EH080
HS-6040
EH090
HS-6057
EH130
HS-6110
EH225
minimum
maximum
WS min
17
16
16
16
13
13
13
- - - - - -
- - - - - -
WS1
23
22
22
21
19
18
17
WS min
WS2 – 1
WS2
30
29
27
26
26
24
22
WS1 + 1
WS3 – 1
WS3
37
36
36
36
33
30
27
WS2 + 1
WS4 – 1
WS4
44
43
42
42
40
36
32
WS3 + 1
WS max
WS max
44
43
42
42
40
36
32
- - - - - -
- - - - - -

GIRBAU EH090 Specifications

General

Brand	GIRBAU
Model	EH090
Category	Washer
Language	English