DOOR FITTED WITH SAFETY LOCK
Never attempt to open the door if:
the program has not finished.
the drum has not come to a complete halt.
the bath has not been completely evacuated.
4.8. Delayed start of a wash program
Allows the user to program the start time of a wash cycle.
Programming the start time:
Load the washing machine, close the door and select the wash program.
Press the C key on the numerical keyboard. On the screen, the current time will appear. Format of 24 hours.
The keys of the multi-function keyboard allow selecting minutes / hours. The value being
selected blinks.
Program the desired starting time on the numerical keyboard and confirm with the key. The start
time remains on the screen.
The STOP key or the keys on the multi-function keyboard cancel the delayed start.
4.9. Unbalance control
Before starting spin, the electronic control of the washing machine checks the correct distribution of the load.
If it detects that the load is not well distributed and that can cause an excessive unbalance during the spin, a new
positioning of the clothes will be carried out.
If there’s still unbalance during the spin of the last phase, the washer can end the washing cycle reducing the
spin speed.
Three unbalance levels, which cause different reactions in the washing machine, have been established.
The unbalance level detected is viewed on the INFO screen when the washing machine executes the spin cycle.
NO unbalance ............ : allows any spin cycle.
LOW unbalance ......... : allows medium speed spin cycles and high speed spin cycles after a certain
number of attempts.
MEDIUM unbalance .. : allows medium speed spin cycles; after a certain number of attempts, it reduces
the speed of the high spin cycles.
HIGH unbalance ........ : does not allow the spin cycle.
As a safety feature, a microswitch monitors the movement of the washer suspended group. It is only activated in
cases of extreme unbalance. This device prevents executing spin cycles.
To Next Page
Loading...
Need help?
General
