Glamox ITNSL-01T User Manual

Exit navigation light configuration
1. Tap on SIGNAL LIGHTS to enter signal lights configuration.
2. Tap on EXIT to save configuration and exit.
Check message!!!
In case that configuration has been changed it is necessary to
check lights grouping and connection before exiting
configuration screen.
1. Tap on OK
Enter property Grouping - check grouping!!!
Enter property Connection - check connection!!!
After checking it is allowed to exit configuration mode.
Automatic reset will be done. Tab OK to continue.
21
4.4 Signal lights configuration mode
Signal lights configuration mode can be entered from navigation lights configuration mode. Pls. check
navigation light configuration mode.
1
2
3
4
5
6
7
8
Property buttons for changing properties of selected
light
Light position and color
- colored circles present configured lights
- grey circuit present possible position of light
- selected light is blinking
PORT/STBD side marks
Configured lights list with:
- light number
- light name
- spare exist (if this text occurs double light is configured)
Save configuration and exit configuration mode
Save configuration and enter navigation lights configuration mode
Arrows for moving trought lights
Mast outlines
Signal lights configuration mode main screen
421
5 6 7 8
3
1
21

Glamox ITNSL-01T Specifications

General

Brand	Glamox
Model	ITNSL-01T
Category	Controller
Language	English