DESCRIPTION
08/2012 6
Function of operating elements
Rotary knob
pull-off length
For setting the pull-off length. If the value is greater than
the stripping length, the remaining insulation is pulled
completely off the cable. If the value is smaller, part is
pulled off.
For setting the conductor diameter.
(cutting depth)
Rotary knob
stripping length
For setting the stripping length.
The start button is pressed by the cable and the stripping
is started.
Display of settings, messages and errors.
Waste tray
(protective hood)
Acts as a protective hood and simultaneously collects
waste insulation.
For convenient transport of the stripper.
Assists the centering of thin wires
To reset the piece counter and acknowledge messages or
entries.
Switches the power supply on and off. After switch-on, the
LC display is illuminated.
Microfuses (2 pcs.) integrated in the power connector.
Device coupler for power cable.
To Next Page
Loading...
Need help?
General
