51
08 System Commissioning
User Manual V1.6-2024-03-20
8.2 Setting Inverter Parameters via SolarGo App
SolarGo App is one smart phone application used to communicate with the inverter via
bluetooth, WiFi, 4G or GPRS modules. Commonly used functions:
1. Check the operating data, software version, alarms, etc.
2. Set grid parameters, communication parameters, safety countries, power limitation, etc.
3. Equipment maintenance.
4. Upgrade software version.
For more details, refer to SolarGo User Manual. Scan the QR code or visit https://en.goodwe.
com/Ftp/EN/Downloads/User%20Manual/GW_SolarGo_User%20Manual-EN.pdf to get the user
manual.
SolarGo App
SolarGo User Manual
NOTICE
Please set the inverter parameters rst via SolarGo app to ensure its normal operation.
8.2.1 Setting Parameters of Single Inverter
8.2.2 Setting Parameters of Parallel System
NOTICE
• When setting the parameters of the parallel system, all inverters need to be connected to
the SolarGo app respectively to complete the single conguration.
• When setting the parallel system parameters, please ensure that the working mode of
each inverter is consistent.
• When setting parameters for a single inverter, please refer to the SolarGo App User Man-
ual. The following only introduces the relevant guidance steps for quick setup in parallel
system.
When setting parameters for a single inverter, please refer to the SolarGo App User Manual.
To Next Page
Loading...
