7 / 24
16570.123_V1sh
• Operation and use of radio-controlled models needs to be learnt!
If you have never driven such a model, then start extra carefully
and make sure to be familiar with the reactions of the model to
the remote control commands. Proceed responsibly.
• First, always perform a range and function test on the ground (to
do so, hold your model tight), before you use your model. Repeat
the test with running motor and with short throttle bursts.
• Only use the components and spare parts that we recommend.
Always use matching, original Graupner plug-in connections of
the same design and material.
• Make sure that all of the plug-in connections are tight. When dis-
connecting the plug-in connections, do not pull the cables.
• Protect the SUMD Diversity receiver from dust, dirt, moisture
and foreign parts. Do not expose it to vibrations or to extreme
heath or cold. The models may only be operated remotely in nor-
mal outside temperatures such as from -10°C to +55°C.
• Always use all your HoTT components only with the latest firm-
ware version.
• If you have questions which cannot be answered by the operat-
ing manual, please contact us or another expert in the field.
For your safety by handling the transmitter and the receiver
WARNING
Also while programming the transmitter, make sure that a con-
nected motor cannot accidentally start. Disconnect the fuel sup-
ply or drive battery beforehand.
CAUTION
Avoid every kind of short-circuit in all sockets of the transmitter!
Risk of fire! Use only the suitable connectors. In no case the elec-
tronic component of the transmitter or of the receiver may be
changed or modified. Due to licensing reasons, any reconstruction
and/or modification of the product is prohibited.
Note
During transport protect the model and the transmitter from dam-
ages.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
