Floor Ceiling Air-Conditioning Unit
12
5.4 Labeling
A label is provided to identify the relationship of the indoor unit No. and the corresponding room
name. The user can write down the indoor unit No. and its corresponding room name on the label
which then will be stuck to the inside of the cover of the smart zone controller so that the user can
be clear about the control object.
For instance, when the user has installed the air conditioners in the child room, bedroom and
living room, after the debugging it is available to view the indoor unit No. of each room and get clear
about their corresponding relationship.
Room Name Child Room Bedroom Living Room
Indoor Unit Address Port 1,Indoor Unit 04 Port 1, Indoor Unit 05 Port 1,Indoor Unit 06
Indoor Unit No. 1 2 3
After get clear about the relationship of the indoor unit no. and the room, the user can write “Child
Room”, “Bedroom”, “Living Room” on the place “1”, “2” and “3” respectively on the label and then
stick the label to the inner side of the smart zone controller.
See 5.8 for the label.
Fig.5.8 Label of the Smart Zone Controller
To Next Page
Loading...
Need help?
General
