U-Match Series Service Manual
19
In the Cool or Heat mode, pressing this button can activate or deactivate the TURBO function.
When the TURBO function is activated, its symbol will be displayed; when the running
mode or the fan speed is changed, this function will be canceled automatically. (This function is
applicable to partial of models).
By pressing this button, Sleep On and Sleep Off can be selected. After powered on, Sleep Off is
defaulted. Once the unit is turned off, the Sleep function is canceled. When Sleep is set to on,
the symbol of SLEEP will display. Under the Fan and Auto modes, this function is not
available.
Press this button to select LIGHT on or off in the displayer. When the LIGHT is set to on, the icon
will be displayed and the indicating light in the displayer will be on. When the LIGHT is set
to off, the icon will be disappeared and the indicating light in the displayer will be off.
3 WIRED CONTROLLER
3.1 Display View
Figure 2-3-1 Appearance of wired controller
Figure 2-3-2 LCD display of wired controller
To Next Page
Loading...
Need help?
General
