Gree GMV-121WL/C-T User Manual

GREE DC Inverter Multi VRF System II Service Manual
114
Remival operation for eletronic expansion valve
Remark: Before removing the electronic expansion valve, please make sure that there’s no refrigerant in th pipeline of
system and the power is disconnected
Process
Photo
Operation Instruction
3)
Replace
electronic
expansion valve
● Weld the
connection pipe of
electronic expansion
valve
● Inistall the coil of
electronic expansion
valve
Note
˗
During welding
process, do not let the
flame burn out other
parts
Removal operation of gas liquid separator
Remark: Before removing the gas liquid separator, please make sure that there’s no refrigerant inside the pipeline of
system and disconnect the power
Process
Photo
Operation Instruction
1)
Disconnect
inlet pipe and
exit pipe of gas
liquid separator
● Weld those two
connection spots on
the gas liquid
separator and then
pull out the
connection pipe
Note: During welding
process, do not let
flame burn out other
parts
2
)
Replace gas
liquid separator
● Loose 4 screws with
screwdriver
● Replace gas lliquid
separator

Gree GMV-121WL/C-T Specifications

General

Brand	Gree
Model	GMV-121WL/C-T
Category	Air Conditioner
Language	English