17
Technical Information
Service Manual
6. Function and Control
6.1 Remote Controller Introduction of YAN1F6(WiFi)
Buttons on Remote Controller
Introduction for icons on display screen
Introduction for buttons on remote controller
WiFi
1
5
3
6
8
10
12
11
9
7
4
2
1
2
3
4
5
6
7
8
9
10
11
12
ON/OFF button
MODE button
FAN button
SWING button
TURBO button
TEMP button
WiFi button
LIGHT button
CLOCK button
TIMER ON / TIMER OFF
button
SLEEP button
▲/ button
▲
WiFi
Send signal
Turbo mode
8
℃
heating function
Set temperature
Set time
TIMER ON / TIMER OFF
Child lock
Up & down swing
Set fan speed
Light
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Sleep mode
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel
Note:
● This is a general use remote controller, it could be used for the air conditionerswith multifunction; For some function, which the
model doesnt have, if pressthe corresponding button on the remote controller that the unit will keep theoriginal running status.
● After putting through the power, the air conditioner will give out a sound. Operation indicator is ON (red indicator, the colour is
different for different models).After that,you can operate the air conditioner by using remote controller.
●
Under on status, pressing the button on the remote controller, the signal icon " "
on the display of remote controller will blink once
and the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.
● Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off and light
functions are set, the corre- sponding icons will be displayed on the display of remote controller at the same
time); Under on status,
the display will show the corresponding set function icons.
WIFI(This is a general remote controller.Some models have this
function while some do not. Please refer to the actual models.)
To Next Page
Loading...
Need help?
General
