Names and functions of wireless remote control of each part
Note:
Be sure that there are no obstructions between receiver and wireless remote control.
The wireless remote control signal can be received at the distance of up to about 10m.
Don't drop or throw the wireless remote control.
Don't let any liquid in the wireless remote control and put it directly under the
sunlight or any place where is very hot.
SWING button
When it is pressed, the
louvers start to swing at
the stated angle and stop
when repressed.
FAN button
Press this button to change
the fan speed of:
AUTO FAN
COOL mode
DRY mode
FAN mode
HEAT mode
button
Press this button, the unit
will start to run, when re-
pressed it, it will stop run-
ning.
MODE button
AUTO
Press the button to change
the operation mode, in order
of:
button
setting temp. will be incre-
the setting temp. will
be de creased 1℃．
W hen press button, the
ased 1℃，when press
the room temp. could
be adjusted in16℃～
30℃.
In modes,
Bird Single-Split Type
To Next Page
Loading...
Need help?
General
