Operation procedures/pictures
Fig.
Screw
Clasp
Fig.
Screw
Screw
Fig.
Screw off 1pc screw from the left of the evaporator,
and loose the clasp. Rotate the evaporator in a certain
angle, could disassemble the evaporator.(As shown
in Fig.8- 10)
Disassemble the motor and cross flow fan
Screw off 3pcs screw from the motor clamp with
screwdriver. And then screw off the screws which
connect with the motor and cross flow fan, could
disassemble the motor and cross flow fan.
(As shown in Fig.8-11, 8-12)
Bird Single-Split Type
To Next Page
Loading...
Need help?
General
