How to insert batteries
Guide for operation procedure
The general procedure:
Cover
Reset key
Insert two AAAbatteries
NOTE:
Don't mix new and used or different
types of two batteries to insert.
Remove batteries away when wireless
remote control is not in use.
The wireless remote controller should be
placed about 1m or more away from the
TV or any other electric appliances.
Re-attach the cover.
Plug to power supply and press ON/OFF button to start the unit.
Press MODE button to select the suitable operation mode.
Press SWING button, swing louver will swing automatically, repressed it , it will stop swing.
Press FAN button to set fan speed.
Press+/- button, to set the desired temperature.
The selected procedure:
Press SLEEP button on the wireless remote control to set the sleep.
Press TIMER button, then press +/- button, to set scheduled time.
Inserting batteries
Insert two AAA dry alkaline cell
Remove the cover from the back, take out of the old batteries, insert two new batteries(Pay attention to the polarity)
When operating the wireless remote control
should be in its' receiving range.
NOTE: When elected the AUTO mode, unit will accord to the indoor temp. to select the suitable running mode, to make
a comfortable ambient.
Bird Single-Split Type
To Next Page
Loading...
Need help?
General
