1.Plug in, press ON/OFF button,
and then air conditioner is turned
3.Press SWING button, the
louvers start to rotate
automatically and stop when
repressed.
4.Press FAN button, set fan speed.
5.Press TEMP. button, set
suitable SET TEMP.
2.Press MODE button, set
operation mode.
- 9 -
on.
DRY mode operation procedure
If room temp. is higher than set temp, compressor operates at a fixed
frequency and indoor fan motor runs at low speed. If room temp.
delays 30 seconds to stop, indoor fan motor runs at low speed.
is 2℃ lower than set temp, compressor stops and outdoor fan motor
Set temp. should be in range of 16℃to 30℃．
To Next Page
Loading...
Need help?
General
