- 12 -
SLEEP mode operation procedure
When the unit is cooling or drying, if SLEEP operation is set, SET TEMP.
would increase 1℃in 1 hour and 2℃in 2 hours.
4.Press FAN button, set fan
speed.
2.Press MODE button, set
COOL DRY or HEAT
operation mode.
6.SLEEP button Press it
to set SLEEPoperation.
3.Press SWING button, the
louversstart to rotate
automatically, andstop when
repress again.
1.Plug in, press ON/OFF
button, and then air conditioner
is turned on.
5.Press TEMP. button,
set suitable SET TEMP.
When the unit is heating, if SLEEP operation is set, SET TEMP. would
decrease 1℃ in1 hour and 2℃ in 2 hours.
Under SWITCH C mode, press H-UP or H-DN button when SLEEP
mode is started, timer-off time can be adjusted from 1 to 7 hour.
To Next Page
Loading...
Need help?
General
