14
3. Continue holding the Locking Tab down
and slide the Desiccant Dryer Cartridge
upwards to remove it from the Desiccant
Dryer Door.
4. Install a new cartridge filled with blue
beads on the Desiccant Dryer Door.
5. Ensure that the small gasket is in place on
the outlet of the cartridge and reinstall the
Desiccant Dryer Door into the pureWash
Pro
X
2
.
6. To purchase additional cartridges call
Customer Service or visit
pureWash.com/Parts
The frequency for changing the Desiccant Dryer
Cartridge will vary depending upon several
factors, including amount of use of the machine
and level of humidity.
1. Remove the door/tray on the left side of the
unit by squeezing the two slides together
and pulling the dryer assembly out.
2. Use a Small Flathead Screwdriver, or other
thin and stiff bladed tool, to depress the
Locking Tab on the inside of the Desiccant
Dryer Door under the Cartridge.
Your pureWash Pro
X
2
has a desiccant dryer incorporated in it to increase the unit’s efficacy and
extend its life. This dryer is filled with a couple of drying agents that remove moisture from the air.
One of the agents, made up of blue silica gel beads, is visible through the dryer window. As this
agent becomes saturated with moisture these beads will turn pink. Once all of the beads are pink
the Desiccant Dryer will need to be replaced to keep your pureWash Pro
X
2
operating at maximum
efficiency.
To replace the Desiccant Dryer, follow the instructions below:
DESICCANT DRYER CARTRIDGE REPLACEMENT INSTRUCTIONS
REGISTRATION
Please register your Product within 10 days of purchase by visiting pureWash.com/Warranty.
To Next Page
Loading...
Need help?
General