6
For your safety and the proper operation of the product, please read through the warnings below
before beginning installation, cleaning, or maintenance.
Disconnect power before servicing.
Do not operate the unit with the cover removed.
pureWash
Pro
X2
is designed for residential use only and is not intended for use in a
commercial or industrial setting.
Water treated by pureWash
Pro
X2
is intended for laundry or cleaning purposes ONLY. It is not
approved for drinking or ingesting.
pureWash
Pro
X2
is intended for use with COLD WATER ONLY, however the hot water hose
should remain connected to the washer and supply faucet to prevent backflow leaks. The hot
water faucet should be turned to the off position to ensure the use of COLD WATER ONLY. If your
washer requires water to be available through the hot water inlet, even on the COLD-COLD
setting, use a Y-Type splitter to attach to the TO WASHER outlet to supply both the COLD and
HOT water hoses.
Risk of water leaks from ruptured hoses or pureWash internal plumbing could occur with
major water pressure surges.
Maximum inlet water pressure is 75 psi.
Never install the pureWash
Pro
X2
in areas where water may freeze. pureWash Pro X2
will always maintain some water in the unit and freezing can cause damage to internal
components.
Do not use flood preventing hoses with auto shut off devices or hoses with an internal
diameter of less than 3/8”. The result will be inadequate flow to the pureWash which will
affect the pureWash operation and greatly reduce performance.
To avoid the possibility of water damage due to flooding it is recommended that you always
turn off the water supply valves/faucets when the washing machine is not in use.
pureWash
Pro
X2
is not recommended to treat water with high iron content. If your water has
high iron content, consult a water quality expert for available options.
pureWash
Pro
X2
can be cleaned with a damp soft cloth. Do not clean your pureWash Pro
X2
with harsh chemicals, abrasives or cleaners.
WARNINGS